What is the Motorcycle Battery Voltage?

We all know how crucial motorbike battery voltage is; now the question arises, what is the motorcycle battery voltage? 

Motorbike voltage is the electric pressure that pushes the electric current in the form of electrons through a loop. On average, the fully charged motorbike voltage is 12 volts; below the 12 volts, your battery may be considered malfunctioned and may need to be replaced asap. 

Let’s look at what it means and what you can do about it. 

While writing this post, I leave no stone unturned so you can know everything about motorbike battery voltage. 

What is the Motorcycle Battery Voltage? 

No rider probably wants their motorbike battery to malfunction, which is why they pay special attention to the motorbike battery voltage. But have you wondered what motorcycle battery voltage is?

Motorbike battery voltage is the electric pressure or a potential difference that an electron in the form of an electric current feels when circulating around the loop. 

In easier words, if your motorbike battery doesn’t have the appropriate voltage, then the electrons in the form of electric current don’t reach the electrical system of your motorbike. 

And that’s why experts always recommend checking your motorbike voltage at every regular interval. 

What is the Value of Motorcycle Battery Voltage? 

So far, you understand what a motorcycle voltage is; now the question arises, what is the value of motorcycle battery voltage? 

In the average motorbike battery voltage, you can find a motorbike battery of 12 Volts. Below the 12 volts, your motorbike battery will start to give problems. 

Does Motorcycle Battery Voltage Impact Charge Time? 

So far, you understand what motorbike voltage is; now the question arises, does motorcycle battery voltage impact charging time? 

According to experts, motorbike voltage impacts hugely on battery charging. For example, suppose your motorbike battery comes with a 12 volt. In that case, it may likely take more time than a motorbike battery with 14 volts. 

However, motorbike battery charger or tender capacity also impacts hugely on the motorbike battery charging time. If you have a motorbike tender with smart and fast charging, it will take less time to charge the battery. 

How to Use Motorcycle Battery Tenders? 

Before connecting the battery to your motorbike battery, experts recommend having soap and water if the battery slips to your skin. 

And make sure you’re wearing full sleeves and protection glasses before maintaining connection. 

Now locate the battery post and figure out which post you need to be grounded or connected with the chassis. 

• For the negative grounded motorbike, you need to connect the positive terminal of the battery tender (red in color) with the positive post of the motorbike battery. 

And don’t forget to connect the negative terminal with the chassis or simply connect it with the heavy iron of the frame. And it’s advisable to not connect the negative wire with the fuel line or any combustible part. 

• For the positively grounded motorbike, connect the negative post with the black or negative part of the motorbike tender. And connect the red or positive wire with the chassis. 

Now you will observe lights are bleeping. I recommend seeing the motorbike tender manual to see the exact meaning of light. 

As different manufacturers have different light indicators.

How Long Would it Take to Charge the Battery? 

Generally, the motorcycle battery charges best at 13.5-14.5 V. You need to ride your motorcycle for at least 3 hours to charge the battery completely. 

As mentioned above, the stator converts mechanical energy to electrical energy. And in this sense, the charging capacity will increase as you increase the motorbike speed. 

You can further decrease the charging time by switching off the additional accessories you installed on your motorbike. Additionally, the smaller the battery size, the faster it would charge. 

Can You Recharge Dead Motorcycle Battery? 

Yes, you can recharge your redhead motorbike battery. But before that, you should know whether you can save your motorbike battery or not. 

The easiest method for checking a motorbike battery is to connect it to the charger. 

It’s a ray of hope if your motorbike battery starts to charge after a few minutes. 

But suppose your motorbike battery is not charging even after connecting for hours. In that case, you need to buy a new motorbike battery.  

You can also check your motorbike battery status with the help of a voltmeter.

Connect. In that case, suppose both ends of the motorbike battery with the voltmeter and see the reading.  

If your voltmeter shows a reading of 0 volts, then there’s a chance that your motorbike battery is completely drained. 

But if your voltmeter shows a reading not more than 11.0 even after being charged for more than hours, then your motorbike battery could be dead. 

And if your voltmeter shows a reading of more than 10.0 but less than 13.0 even after charging for an hour, consider your battery is sulfated. 

Experts always consider checking your motorbike battery status before reviving it. No one wants to spend a buck on a motorbike battery charger. 

No worries, in the later section, I’ve mentioned some ways through which you can revive your dead motorbike battery. 

How to Check Motorbike Battery Voltage? 

So far, you understand what motorbike voltage is; now the question arises, how can you check motorbike battery voltage? 

You need to have a voltmeter to measure motorbike voltage in the test below. I recommend having a digital voltmeter for accurate readings. For more accuracy, I highly recommend that you perform this test after 12 hours of shutting down your motorbike because it takes approximately 12 hours for the electric charge to dissipate. 

Additionally, before performing this test, make sure you turn off your vehicle’s electrical system. 

You need to remove your motorbike battery from the motorbike, uncover the battery’s positive terminal, and clean it if necessary. You need to connect the motorbike battery’s positive terminal to the voltmeter’s positive terminal. 

Do the same for the negative terminal as well; now you’re ready to check the voltage of the motorbike battery. 

Now check the voltmeter reading; in an average motorbike battery, the voltmeter will show you a reading between 12.4 to 12.8; if the voltmeter shows the same reading, then your motorbike battery is in good condition. 

Suppose your motorbike voltage shows a reading above 12.8. It means your motorbike battery is overcharged, and you need to switch ON the high beam light to use additional charge. 

And suppose your voltmeter is showing readings below 12.4. In that case, you need to charge your motorbike battery slowly to avoid overheating and release of toxic gasses. 

Also, read my previous post where I discussed whether you can add water to your motorbike battery or not, CLICK HERE to read.

Frequently Asked Questions:

Final Verdict: 

What is the motorcycle battery voltage? Motorbike voltage is the electric pressure that pushes the electric current in the form of electrons through a loop. 

On average, the fully charged motorbike voltage is 12 volts; below the 12 volts, your battery may be considered malfunctioned and may need to be replaced asap. 

I’ve also mentioned in the reading that a healthy battery must show on the voltmeter and what to do if your motorbike battery is showing a low and high reading.